Aqua Vitalis Reverse Osmosis Systems
Pure At The Tap Sized For Your Water Serviced On Time

Aquavitalis LLC builds and maintains reverse osmosis drinking water systems for the Salt Lake Valley from a working shop at 1220 E 400 S, Salt Lake City, UT 84102-3219, United States. We test the water first, size the machine to the reading, and keep every cartridge change on a calendar so the glass at the tap tastes the same in year one and year ten.

What Sits Under Your Sink

Stage oneSediment cartridge
Stage twoCarbon block
Stage threeRO membrane
Stage fourPolishing filter
Stage fiveMineral drop
Stage sixUV polish

Filter change window open. Aquavitalis LLC opens its quarterly filter-change scheduling window for subscription holders across Salt Lake City and the surrounding valley.

Drinking Water, Engineered

A Machine Room Built Around Your Water Report

Every home in the Salt Lake Valley draws a slightly different glass of water. Hardness climbs and falls block to block, older service lines shed sediment, and the taste shifts with the season. Aquavitalis LLC treats those readings as the starting point instead of a sales pitch. We sample the cold line at the kitchen tap, measure total dissolved solids and hardness, then assemble a reverse osmosis system whose membrane, tank and pump are matched to what the numbers actually say.

Six Stages, Six Services

The Filter Rack That Runs Your Home

Each housing on the rack answers one job, and each job is a service Aquavitalis LLC performs end to end.

Sediment

Free Water Testing

Before we quote a single cartridge we come to your kitchen with a calibrated meter and draw a cold sample. We read total dissolved solids, hardness, chlorine and pH, then walk you through what each number means for the pipes in your home. The visit costs nothing and carries no obligation.

Read the full service H1
Carbon

Under-Sink RO Systems

The compact four to six stage unit that lives in the cabinet below the sink. It filters drinking water at one dedicated tap and leaves the rest of the house untouched. We fit the tank, the faucet and the drain saddle so the counter stays clean and the cabinet still has room for pots.

Read the full service H2
Membrane

Whole-House Filtration

When every tap, shower and appliance deserves treated water, we install a point of entry system at the main line. Sediment and carbon vessels handle the whole flow, a softener protects the water heater, and a dedicated RO loop still feeds the kitchen for drinking.

Read the full service H3
Polishing

Filter Subscription Changes

Cartridges age on a clock, not on a mood. Our subscription ships the correct sediment, carbon, membrane and polishing elements to your door on schedule, and our technician swaps them, records the new readings and recycles the spent housings on the same visit.

Read the full service H4
Mineral

Annual System Sanitization

Once a year we open the machine, disinfect the tank and lines, replace the O rings and inspect every fitting for scale. Sanitization keeps biofilm out of the storage tank and keeps the first glass of the morning tasting as clean as the last.

Read the full service H5
UV

Leak Protection and Monitoring

Every system we leave behind carries a shutoff valve and a leak sensor on the floor of the cabinet. If water ever pools where it should not, the valve closes and the alert reaches you before the cabinet floor does. Small sensors prevent large repairs.

Read the full service H6

Why Size Matters

An Oversized Membrane Wastes Water, An Undersized One Wastes Your Patience

A reverse osmosis membrane performs best inside a narrow band of pressure and temperature. Push too much flow through a small membrane and the rejection rate falls, so dissolved solids slip past into the tank. Fit a membrane far larger than the household needs and the system cycles constantly, sending good water down the drain. Aquavitalis LLC measures the incoming pressure, the water temperature and the daily draw of your household before choosing a membrane, and we explain that reasoning in plain terms so you can see why the machine looks the way it does.

The same care shapes the pump skid. Homes on a private well often arrive at the membrane with low pressure, so we add a booster pump and a pressure switch. City homes on steady pressure usually need no pump at all. A whole-house filtration install begins with the same discipline, scaled from one tap to every fixture on the property.

  • Cold line sample read on site, not by mail
  • Membrane chosen from pressure, temperature and daily draw
  • Tank sized so the family never runs dry at dinner
  • Pump added only where the reading calls for it
  • Every fitting pressure tested before we leave

Typical Reading, Typical System

Incoming TDS180 to 420 ppm
Finished TDS12 to 30 ppm
Line pressure40 to 80 psi
Stages fitted4 to 6
Storage tank3.2 to 11 gallons
Filter cycle6 to 12 months
SanitizationEvery 12 months

How A Job Runs

Four Visits From First Sample To Scheduled Service

Nothing about the process is improvised. Each step has a checklist and each checklist has your signature at the end.

Step 01

Test

We sample the cold kitchen line and record TDS, hardness, chlorine and pH on a written report you keep.

Step 02

Design

We size the membrane, tank and pump to the reading and to how much water your household actually uses.

Step 03

Install

We mount the rack, run the tubing, fit the tap and pressure test every joint before the cabinet door closes.

Step 04

Service

Filter changes, sanitization and leak checks arrive on a schedule so the system never drifts out of tune.

Where We Work

Salt Lake CityCore service area
Sugar HouseSame day callouts
MillcreekCore service area
HolladayCore service area
MurrayCore service area
SandyBy appointment
West ValleyBy appointment
Park CityBy appointment

Homes And Offices

Designed For The Kitchen, Trusted In The Break Room

Most of our work happens in family kitchens, but the same machine serves break rooms, dental suites, small clinics and offices where several people draw drinking water all day. For those sites we size the tank for a morning rush instead of a single family, and we add a second polishing stage so the water stays bright even when the system runs hard. A filter subscription change keeps a busy office on schedule without anyone from the front desk remembering to call.

Because the shop is on the east side of Salt Lake City, a technician can often reach a leaking fitting or a stalled pump the same afternoon. That proximity is not a marketing line, it is the reason we can promise a fast callout and mean it.

Every service on this page is delivered by our own staff. We do not subcontract installations, and the technician who fits your system is the technician who services it year after year.

Start With A Free Water Test

Tell us where you are and what tastes wrong, and we will bring the meter. One visit gives you a written reading, a sized recommendation and a price that includes the filters for the first year.